Browse Our Products


Hetas

Paypal

Conical Adapters

Brand: Fluetrader
Product Code: FTSW043
Availability: In Stock
Incl VAT: £26.53
Ex VAT: £22.11

Available Options

* Diameter:

Qty: +
-
  - OR -  

Single Wall 1mm think stainless steel flue pipe is used to connect an appliance to either a chimney liner, stack or twin wall flue system. It can also be used to reline existing masonry chimneys. It is recommended that a verticle rise of 600mm should be allowed, immediately above the appliance before any change in direction. If bends are needed, then no part of a flue pipe should form an angle greater than 45° from the verticle, except where it may be necessary to use a very short horizontal section, not exceeding 150mm of flue to connect the flue pipe to a back outlet appliance. A maximum of 4 bends ( 2 offsets ) is permitted. Distances from combustible materials must be three times the diameter of the flue pipe. E.g. 150mm dm = 500mm clearance.

 

Gas

Oil

Wood

Coal

Pellets

Fuel Type

Yes

Yes

Yes

Yes

Short description:

FSW 316 is a quality single wall connecting flue system designed and approved for use with all fuels including gas, oil, wood and approved solid fuels

Inner liner material:

1.0mm grade 316L stainless steel

Insulation density:

N/A

Joint method:

Push fit and locking band

CE approved:

Yes

Designation:

BS EN 1856-2 T600 N2 D 3 G

Maximum operating temperature:

600°C

Condensate resistance:

Yes

Corrosion class:

V2

Soot fire resistance:

No

Minimum clearance to combustible material:

500mm

Warranty:

2 years conditional warranty