The EBC20 is an automatic control system for boiler installations and for other installations in which multiple heat sources are connected to the same chimney. The control monitors and maintains a specific draught by maintaining a constant pressure.
The control may only be used with exodraft fans.
The EBC20 system consists of an EBC20 controller, which can be positioned anywhere, and a pressure transducer (XTP sensor) which is positioned in the chimney.
In installations where several fireplaces or stoves are connected to the same chimney, the chimney fan operates continuously. The EBC20 controller monitors and maintains a specific draught by maintaining a constant pressure. The pressure in the chimney is measured by the XTP sensor. If the draught falls below the set value, the speed of the chimney fan is regulated until the draught reaches the required level again.
The EBC20 is usable with all exodraft chimney fan types.
EBC20EU01 Controls for indoor installation.
EBC20EU02 Controls for outdoor installation.